Toolkit 1.11.2 and SENLL FW2.3.00

Discussion in 'C-Bus Toolkit and C-Gate Software' started by constantcharge, Aug 19, 2010.

  1. constantcharge

    constantcharge

    Joined:
    Nov 23, 2004
    Messages:
    83
    Likes Received:
    0
    Location:
    Adelaide
    Hi guys,

    Not sure if this is a know problem or not.
    Get SENLL ver 2.3.00

    Open in toolkit.
    The all fields are blank not showing "unused". eg Light Level, Enable Group etc..
    Set groups to fields then save.
    Open unit back up and blank fields again, if you drop down they are actually there just hidden/no displayed.
     
    constantcharge, Aug 19, 2010
    #1
  2. constantcharge

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Known issue, fix coming soon.
     
    Newman, Aug 19, 2010
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. IP56 weather proof SENLL (light level sensor)

  2. Getting light level from SENLL

  3. SENLL lux level

  4. SENLL & Indirect Lighting

  5. SENLL Target Lux Too Small

  6. Senll to control 5753PEIRL and lamp

  7. SENLL Firmware update

Loading...