Toolkit 1.11.9 and Multi Sensor

Discussion in 'C-Bus Toolkit and C-Gate Software' started by Thomas, Oct 12, 2011.

  1. Thomas

    Thomas

    Joined:
    Nov 25, 2004
    Messages:
    252
    Likes Received:
    0
    Hi,

    There seems to be an issue with TK 1.11.9, not being able to load a 5753PEIRL (Multi Sensor) from the network.
    It runs through the loading dialogue to about 90%, then comes up with an error and aborts loading.
    Unfortunately the site is out in the sticks, and I was under time pressure, so didn't take further details.
    I had to install TK 1.11.1, which worked fine.

    Cheers
    Thomas
     
    Thomas, Oct 12, 2011
    #1
  2. Thomas

    Charlie Crackle

    Joined:
    Aug 3, 2004
    Messages:
    815
    Likes Received:
    8
    Location:
    Melbourne
    I just tried on my setup and at 90% the software crashed with an
    Access violation.

    Charles
     
    Charlie Crackle, Oct 13, 2011
    #2
  3. Thomas

    george

    Joined:
    Jul 26, 2004
    Messages:
    158
    Likes Received:
    1
    Location:
    Adelaide
    Hi guys,

    Sorry about the gotcha. Next Toolkit will have this fixed. Please put up with the older version of Toolkit for the next few days if you need to program Multisensor with firmware 2.0.00. Other firmwares are unaffected.

    Regards,
    George
     
    george, Oct 13, 2011
    #3
  4. Thomas

    Thomas

    Joined:
    Nov 25, 2004
    Messages:
    252
    Likes Received:
    0
    No worries, just glad it's not something I am doing.. :)
     
    Thomas, Oct 13, 2011
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.