Toolkit 1.12 issue

Hi guys. Just like to start with awesome work regarding copy network/ applications. Also saving units as templates. Very good. Nice to here feedback is taken on board.
Notice that the rework regarding the peirls (I have only checked Peirl's) that was done in 1.11.12 giving us back the ability to use the same enable/disable group for the light level sensor in motion detector control has not been carried over onto 1.12. I suspect it is the same case with motion detectors as well. Also the awesome new features regarding linking setpoints/hysteresis to group addresses in the peirls has not been carried over into 1.12. Any idea when 1.12.1 is coming out?

 

Hello,

Thanks, I'm glad you like the new features!

As for Light Level Enable being controlled my motion control. We've recorded this in our bug tracking system and will address the issue shortly. (#23629)

The problem you're having, being unable to use group addresses in peirls, this feature was added in new sensors only.

Units that support this feature: SENPILLA, SENPIRIC, SENLLA.

I suspect you are using a SENPILL and hence the controls are not shown.

Cheers,
Andrew

 

Thanks Andrew. I was under the impression the new firmware was going to be rolled out in the new toolkit for the older units. Is this not the case? The new functions will only be available in the new surface mount series? Not a massive drama but something I noticed. In regards to light level enable/disable with motion I thought this had already been addresses in previous toolkits? I will check when I get a chance.