Toolkit 1.5 problem

Discussion in 'C-Bus Toolkit and C-Gate Software' started by martymonster, Aug 18, 2006.

  1. martymonster

    martymonster

    Joined:
    Aug 5, 2004
    Messages:
    162
    Likes Received:
    1
    Along with the display of 'Serial number Only' for some units, I noticed that when using a Wireless Plug adapter (WPA2R1) under 'Key Functions' the 'Key Sets Management' has gone missing. This means you cannot choose other key sets to use with the remote control etc.

    Martin
     
    martymonster, Aug 18, 2006
    #1
  2. martymonster

    Duncan

    Joined:
    Jul 23, 2004
    Messages:
    925
    Likes Received:
    0
    Location:
    Salinas de Garci Mendoza, Bolivia

    I still see it.. What firmware version is the unit you're looking at?
     
    Duncan, Aug 18, 2006
    #2
  3. martymonster

    martymonster

    Joined:
    Aug 5, 2004
    Messages:
    162
    Likes Received:
    1
    Hi Duncan, Tolkit shows Firmware 1.0.0 in both Toolkit 1.4.0 and 1.5.0
    I have attached a DOC file (hopefully it worked), the first picture is Toolkit 1.5.0, the second picture is from Toolkit 1.4.0.

    I was going to set up some more keys for use with the Remote when I noticed that I could not.
    Under Toolkit 1.4.0 I have been using some of the other key sets as scenes to be used by the Remote.

    Martin
     

    Attached Files:

    • Doc1.doc
      File size:
      119.5 KB
      Views:
      336
    martymonster, Aug 18, 2006
    #3
  4. martymonster

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,400
    Likes Received:
    26
    Location:
    Adelaide, South Australia
    Thanks.

    Key sets were present in wireless from the very first firmware release. However there was a wee defect. It will work, there is an edge case relating to Toolkit programming a change of the active key set. This was fixed in Wireless firmware ver 1.7.

    We've closed the door off in Toolkit 1.5 because for the earlier versions of Toolkit its not 100% foolproof.

    As I remember it, the key sets issues with the early firmware relates ONLY to changing the active key set using toolkit - in that the change does not become active until the key unit (or plug adaptor) either gets its power cycled, or you issue an appropriate enable control message to force a change. Either way its not the end of the world, just something we were not completely happy with.

    If you are only uising the extra (hidden) keys and blocks to do neat stuff from a remote, the lack of the ability to select the active key set will have no effect.

    Looks like we better open the door a crack - perhaps put up a warning about key sets with those early firmware releases.

    In the meantime, you'd better keep using Toolkit 1.4. We'll see what we can drop into the next Toolkit service pack.
     
    ashleigh, Aug 18, 2006
    #4
  5. martymonster

    martymonster

    Joined:
    Aug 5, 2004
    Messages:
    162
    Likes Received:
    1
    Thanks Ashleigh
     
    martymonster, Aug 18, 2006
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Problem With COM ports in Toolkit 1.1.4

  2. Problem exportingting using Toolkit 1.1.4

  3. Possible problem with the Installer of C-Bus Toolkit 1.1.5

  4. Problem with toolkit v1.1.5

  5. Weird problem with toolkit and old install software

  6. Wierd GA Cache-ing problem - Toolkit & PICED

Loading...