Toolkit 1.5 Released

Hi

Toolkit 1.5 has been released. You can find the installer here
(Select "Show alternate download" if you want the partial installer)

Major Additions

1. New "Add Groups" feature for bulk addition of groups
2. New "Reset Unit" button on Unit Dialogs to restore factory programming
3. Improved "Backup Projects" and "Restore Projects" dialogs
4. Improved Dali Unit dialogs
5. Toolkit Help File added
   

Major Fixes

1. Problem accessing unit specifications when running C-Gate under Linux
2. Conversion of SENPILL unit from firmware version 1.x to 2.0
3. 'Match Serials' sometimes not matching serial numbers
4. Readdressing units operation made less restrictive
5. Problems using barcode scanner with Saturn wireless and wired units
6. Status report interval of "never" removed for all units

Known Issues in this Release

1. PC_DAL2C network units may not open. Try unplugging it from C-Bus for 10 seconds
2. # character still not properly supported in Tag Names and DLT Labels
3. Units/Groups/Levels of Applications given a TagName from '1' to '255' may cause problems, instead use "Group 1", or better still use a meaningful group name like "Kitchen Lights"
4. Little green add/edit buttons for Key Set Control Group in Wireless Units do not work

Full List Of Changes

Bar Code Scanner : Cannot add KEYB2 & 6 units to the DB using bar-code scanner
Bar Code Scanner : 503xBNL Inputs with Blue Led(s) not recognised
Bar Code Scanner : Saturn wireless units can't be entered into database with barcode scanner
Browser - Physical Units View : Try to re-address a unit that doesn't exist causes a crash
Browser - Physical Units View : 'Match Serials' button is not working correctly or sometimes at all.
Browser - Physical Units View : Exists in Database Column Information Incorrect
Browser - Treeview : Application log refresh issue
Browser - Treeview : Exception error when pressing cancel on a unit GUI
Browser - Treeview : Project manager state not persisted between invocations
Browser - Treeview : Creating New Network For Project Has Blank State...
Browser - Treeview : F6 key to readdress unit doesn't work
Browser - Treeview : Inconsistant status format in treeview
Browser - Treeview : Multiple add of groups
Browser - Treeview : Does not allow you to delete muliple groups at once
C-Gate Connection : Unit Specs fail on Linux due to Capitalisation
DB View : Exception raised while deleting units from the DB in quick succession
General : Add new C-Gate site "Site Name" list box has no restrictions to the number of chars than can be entered
General : Edit Group dialog has no sub header information.
General : About Box shows Copyright 2005, not 2006
General : OK Button in Add/Edit Network Dialogue Not Default...
General : Need more graceful check for required files on startup
General : Suggest use of generic name for the various Project dialog boxes.
General : Error message has incorrect grammar and repeats the same information
General : Error messages 2064 and 20040 are not consistent.
General : Cannot open Toolkit Express
General : Exception wen trying to save unit data to closed network...
General : Trigger Group Add Dialogue Text Ill-Formatted...
General : Unexpected error when editing a gui with multiple open networks
General : Removed raised bevels in main Toolkit window
General : Disable Map A could be more accurate.
General : Mirror C-Bus to DALI has different action depending on where you select this feature.
General : Spaces on the ends of Tags need to be truncated.
General : Exception error if unit dialogs are open when a project is deleted.
General : Save Project All fails with exception 'ECGateNoUnitSpecAvailable'
General : Unintuitive informative message - Failed to open Network, MMI was incomplete
General : Application exception on saving unit data after a SCAN NEW
General : When adding a unit using the Add Unit Dialog the firmware version can be edited
General : MMI based unravel does not work on wireless networks
General : Edit Languages has not been changed to "DLT Labels" in all instances within Toolkit
General : Exception error raised if a DLT graphic name contains a comma
General : Units disappearing from network browser list and exception raised if a Project or Network is renamed while the unit dialog open.
General : Unit is locked for programming message seems be applied when its not being edited.
General : Catalog number E5500CN is not supported
General : Exception raised if "Restore Project" is used while a Unit GUI is open
General : Toolkit Express: Exception error raised if the the Snapshot button is used more than once.
General : Exception raised when the tag dir is removed and Toolkit invoked
General : Exception error when saving Unit GUI that was open after a "All Unit -> DB" operation.
General : Toolkit Express: Exception error raised if user selects "Scan C-Bus" button while networks are open with Toolkit/C-Gate
General : Uncaught Exception When Creating Project With Invalid Name...
General : Exception raised while attempting to save the project name to all units on the network
General : You are able to insert letters into a database serial number.
General : Align types name does not accurately describe the underlying functions purpose
General : Area address can be configured when the application is set to unused
General : Combos in Add Network Dialogue
General : Unit Identity OK Button Not Default
General : Groups not appearing under DLT Languages dialog
General : Exception raised while deleting custom application
General : Unable to create more than one scene on an input unit
General : New unit in Database cannot be readdressed to match a unit to be that you wish it to be transformed to
General : Unhandled exceptions raised when certain menu options are executed & the repo is disconnected
General : Toolkit allows different levels on the same GA to have the same name
General : Duplicate group addresses get created when editing group tags in other applications
General : Calculator display is not consistent
Import Export : Importing project feature in Toolkit not working properly
Import Export : Restore of projects is confusing
Import Export : Export fails on project that has local network of CBTI type
Import Export : Error upon attempt to retore backup project
Installer : Installer should provide the option to add a Toolkit shortcut to the desktop
Installer : Java not installing if PC has "My Documents" mapped to a network drive
Installer : Toolkit uninstaller does not remove all artefact's
Installer : Check if C-Gate is running before installing Toolkit
Installer : Java can be installed only by Admin user
Installer : Get the default destination location from the Registry if older version of Toolkit is already installed
Installer : Toolkit does not install registry keys / open C-Gate
Match Serials : Exception raised after exercising the match serials function
Network View : Pressing ESC during scan prevents unit UI's being saved due to missing Part Name data
Network View : Loading RELDC4 from network shows cat# for corresponding unit in database, even when units are not the same.
Network View : Toolkit Express - Groups 1 to 3 columns are hidden
Project Restore/Backup : EFCreateError exception when backing up project
Project Restore/Backup : Unable to restore a *.cb3 project file.
Project Restore/Backup : Show both CB3 and CBZ files when allowing user to select archive
Topology/Network Properties : <make network=""> allows the network address of the new network to be 255
Unit - Bus Coupler Pro : Reintegrate vieo support into toolkit public build
Unit - DALI (PCDAL2B) : Enable Levels not selectable in Error Reporting Tab
Unit - DALI (PCDAL2B) : Add Support for PC_DAL2C
Unit - DALI (PCDAL2B) : Have a DALI recovery tab feature.
Unit - DALI (PCDAL2B) : Spelling in the status Tab. "Acknowledge" is wrong within the network table.
Unit - DALI (PCDAL2B) : Alt + C shortcut in Dali GUI is replicated twice.
Unit - DALI (PCDAL2B) : Pressing the Mirror All to C-Bus button on network B takes much longer than network A.
Unit - DALI (PCDAL2B) : Add use of delete key to set C-Bus or DALI groups to unused.
Unit - DALI (PCDAL2B) : Exception Error thrown when adding a group in the DALI to C-Bus Map tab.
Unit - DALI (PCDAL2B) : Group Column in Dali GUI not wide enough
Unit - DALI (PCDAL2B) : Tidy up text in Status column
Unit - DALI (PCDAL2B) : Disable DALI to C-Bus mapping when Status Correction is enabled
Unit - DALI (PCDAL2B) : When selecting <unused> it can set up only DALI to C-Bus mapping.
Unit - DALI (PCDAL2B) : Dis-allow DALI Scenes when Load Status Correction is enabled
Unit - DALI (PCDAL2B) : 'Learn Mode Active' indicator not working.
Unit - DALI (PCDAL2B) : PC_DAL2B incorrectly shows firmware versions 4.0.00 - 4.2.00
Unit - Dimmer - DIN : Min/Max tab on 8 Channel Dimmer broken.
Unit - Dimmer - DIN : Support for new Dimmer: DIMDN4F
Unit - Dimmer - DIN : In max/min tab, Stagger values not correct.
Unit - Dimmer - PRO : Stagger Delay for all Dimmers is broken and is not representing the correct value.
Unit - Dimmer - PRO : When Delay is set to minimum, the correct time is not being shown.
Unit - DLT : Assertion Failed when param $60 is set to $30.
Unit - DLT : Exception Error raised when trying to set timers on corridor linking.
Unit - DLT : Tab Order of Groups and Functions wrong
Unit - DLT : Drop down lists place unused in different places.
Unit - DLT : Cursor over Primary/Secondary buttons changes from arrow to a hand Intermittently.
Unit - Key4, IR, BC, AUX : KEY4 Power Fail settings not being stored correctly
Unit - Neo, Saturn, Reflection : Newly created Trigger Groups don't allow you to create a new Action Selector
Unit - PCI : Allow software burden selection for INT_xxxx
Unit - Relay - DIN : Support new output core unit RELDN8B
Unit - SENPILL : When a unit has been disconnected from thenetwork & the cancel GUI button has been pressed it comes up with the exeption error
Unit - SENPILL : Could not convert a version 1.0 Multisensor in database to match version 2.0 unit
Unit - Wireless Gateway : Incompatible PC Interface firmware with Wireless Gateway
Unit - Wireless Input : Allowed to configure levels with group set to unused on Enable Control
Unit - Wireless Input : Inconsistent behaviour when adding a Wireless Remote Control to the database
Unit - Wireless Input : Values added to Enable Control application are not updated in Key Set Selectors 2, 3 and 4 while wireless Unit GUIs are open
Unit - Wireless Input : Protect against configuring Key Set Selectors and Restore to Key Set when all key groups are unused
Unit - Wireless Input : When "blank" Key Set Selectors are saved, key units seems to be defaulted to the first blank key set.
Unit - Wireless Input : Exception while trying to open Wireless Unit after applying changes to 2 Units and closing GUI's
Unit - Wireless Input : When changing wireless configuration on Key Functions tab, get weird configurations.
Unit - Wireless Input : Exception when contracting microfunction node on Functions tab
Unit - Wireless Input : Enable key set check box within and key set control section within Global tab is grayed out and unavailable for editing
Unit - Wireless Input : When "Restore On Power Up" is disabled, Toolkit needs to default save Key Set 1 to the unit
Unit - Wireless Input : Block assignments set incorrectly on wireless units
Unit - Wireless Plug Adaptor : Unexpected error occured when opening up GUI for LE plug pack.
Unit Catalog : Add released firmware versions to Toolkit for new Aurora output cores
Unit Catalog : Toolkit support for 1.8.00 input units needs to be added
Unit Catalog : Support for 4.5.00 PCIs
Unit Catalog : Must support PCI firmware 4.0.0 and 4.00 for C-Touch
Unit Dialog : OK CANCEL APPLY HELP button order
Unit Dialog : Disallow the use of $FF value for a restrike delay
Unit Dialog : Line/Mains Present text and LED are slightly obscured
Unit Dialog (general) : Exception raised while attempting to save unit setting to DB/network
Unit Dialog (general) : Exception error when "All Units -> DB" or "Unit -> DB" is used while the unit dialog is open on the network
Unit Dialog (general) : Type to select group not working
Unit Dialog (general) : Status report option <never> should be removed
Unit Dialog (general) : On every units GUI there should be a factory reset button.
Unit Dialog (general) : Possible to launch duplicate unit dialogs via different nodes</never></unused></make>