Toolkit 1.7.1 released

Hi,

Toolkit 1.7.1 has been released. You can find it at the CIS Downloads page: http://www2.clipsal.com/cis/technical/downloads/

If you are upgrading from 1.6.x or already have the latest Java installed you may instead click on "Show alternate download" to download the Partial Installer as this is much smaller.

Major Changes

1. Thermostat support
2. Accessing C-Bus network via B&W Touchscreen USB connection
3. Support for Wired and Wireless Decorator units

Change Log

0007941 'Key Set Control' field is active when the 'Enable Key Sets' check box is disabled.
0007438 'Clear labels' button in DLT UI should indicate when the task has been completed
0005156 Support modem init strings
0005785 UI doesn't indicate that Margin parameter affects Bank Switching
0006107 PIR functions disappear from key function drop box
0005945 Ping units does not scroll down when pinging a large network
0005421 Duplicate unit addresses available in the readdress list
0007924 When disabling IR on NEO, saturn and reflection units the wrong bit is set
0009555 Readdressing, should default to "best" address
0009553 Toolbar heights different between database and network views
0009600 Add text description next to burden checkbox explaining when it can be used if it is restricted to limited addresses
0009563 Action Selector Add" Dialog's Help Button loads wrong Help Topic
0009561 Level of Group" Indicator Brightness option does not use unit's current Application
0009568 Add/Edit Application dialog has help button but no help file
0009536 PC_GIM - Difficult to change threshold level via text box.
0007895 Progress box not modal, allowing a possible situation of users not knowing how far things have progressed.
0002066 Group On/Off buttons available when Network not connected
0009549 Edit Group dialog not customising for different Applications
0002779 Image for L5504D2A not quite right.
0002545 Serial Number representation
0004024 Try to add unit to database when there's an existing unit has a confronting error dialogue
0004439 When discovering projects, existing project fails to open
0004504 Sort units on network does not include any "Scan New" unit (in blue)
0004521 All - DB" pop-up box displays "unit unsupported", if you then .......
0005295 Show more meaningful message if can't open dual core unit like PC_WHAD because its not powered
0004356 Make Network" causes crash if Wireless Gateway already in Database
0008477 Clarify that Unit Conversion does not transfer programming
0004989 Timeout & Failure when sending labels on non-lighting application
0006051 Rules for enabling check boxes for unsupported units are not enforced consistently
0009796 INT_* units need clock + burden to be independent
0010107 Database SENPILL set default Light Level Target = $2D for all version of firmware, whereas it should be different for each ver.
0009968 Application Log doesn't handle PCI USB messages nicely.
0009959 If Non-Admin user installs USB Driver, obscure error message given
0009918 MultiRoom Audio Amplifier for the U.S. - The Following are features that need to be applied to Toolkit for the MRA Amplifier.
0009855 exception when editing mismatching units (for unit conversion)
0009792 Link help topic to Unit Identity dialog.
0004172 Lux reported as zero when Occupancy sensor is in use
0009541 PC_GIM Event Edit Buttons Not Grayed Out When Disabled
0009557 Copy Tags.. improvements..
0006125 Treeview not refreshing properly after a copy tags operation has been performed
0006015 Uploading information from the database to an amplifier ?4
it IS connected, or the other way around as stated in your post?