Toolkit Fault

Discussion in 'C-Bus Toolkit and C-Gate Software' started by darrenblake, Feb 19, 2007.

  1. darrenblake

    darrenblake

    Joined:
    Nov 1, 2004
    Messages:
    151
    Likes Received:
    0
    Location:
    Melbourne
    Hi All,

    Please be aware of a change to the default settings for the 10 and 20amp Pro series dimmers in relation to the Recovery settings.
    Traditionally, the Recovery settings have been factory defaulted to N/C or "No Change".
    This appears to have changed in the latest builds of Toolkit to "OFF".
     
    darrenblake, Feb 19, 2007
    #1
  2. darrenblake

    PSC

    Joined:
    Aug 3, 2004
    Messages:
    626
    Likes Received:
    0
    Location:
    Brisbane, Australia
    Hi Darren,

    I'm not sure if that is a Toolkit issue or a firmware issue.

    Last week I programmed a couple of new 10amp Pro Range dimmers and there where ticks in all the logic boxes with a GA of 'unused'. :confused:
     
    PSC, Feb 19, 2007
    #2
  3. darrenblake

    darrenblake

    Joined:
    Nov 1, 2004
    Messages:
    151
    Likes Received:
    0
    Location:
    Melbourne
    PSC,

    Not sure, dimmers on-site are at least a month old, either way, caused me a head-ache or two!!!!!
     
    darrenblake, Feb 19, 2007
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. CBus Fault

  2. Fault current vs. Time

  3. Remote Amplifiers fault to open in toolkit

  4. HPM IControl Touch Screen Fault

  5. Lighting fault

  6. How to Import old Toolkit cb2 project files into current Toolkit 3 software.

  7. Can anybody see the fault with this PICED logic?

  8. Faulty eDLT buttons, 'known manufacturing fault'

Loading...