Toolkit Proposed routing bridge unit is not a bridge device??

Discussion in 'C-Bus Toolkit and C-Gate Software' started by mikegriff, Apr 21, 2025 at 11:34 PM.

  1. mikegriff

    mikegriff

    Joined:
    Aug 3, 2004
    Messages:
    157
    Likes Received:
    3
    Location:
    Wales
    It has been for years
    I have just upgraded to C-Gate 3 but it worked for a week!! fault.jpg
     
    mikegriff, Apr 21, 2025 at 11:34 PM
    #1
  2. mikegriff

    mikegriff

    Joined:
    Aug 3, 2004
    Messages:
    157
    Likes Received:
    3
    Location:
    Wales
    Rolled back to Toolkit 1.17.6 and C-Gate 3.3.2 and restored setup from 15/04/2025.
    It is working again and 254 is happily back being a Bridge again!!!

    Could someone tell me when "CBusToolkit-1.18.1.2774-CGate-3.4.1.2055-Setup" replacement is safe?
    Thanks in advance
    Mike
     
    mikegriff, Apr 22, 2025 at 10:22 AM
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Special Function not passing through NTWK bridge

  2. CTC Scene not working across bridge

  3. Relay unit scanning in Toolkit as 8ch when in fact a 12ch Unit.

  4. 5500CN2 Device Not Accessible, but found on network, help to connect to edit project file

  5. C-Bus Relay Unit L5512RVF "Unit not responding"

  6. New to C-BUS Diagnosing Fan on Voltage Free Relay Device Not Working

  7. 1.33.1 Upgrade not installing - No space left on device

  8. Clipsal 31LCDA Load Correction Device for downlight not turning off 100%

Loading...