Touch Screen wont come on

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by rogencam, Aug 25, 2010.

  1. rogencam

    rogencam

    Joined:
    Jul 11, 2010
    Messages:
    3
    Likes Received:
    0
    Location:
    Brisbane
    I have colour touch screen. When I power it on - the blue light comes on but nothing happens after that - just stays blank. Was working earlier today. Any ideas?
    I have tried pressing hard reset and still nothing. I had it at my office using one network and have now bought home and loaded a project using network here. The project loaded OK - but I was getting error on boot about not being able to open serial port. On reboot it wont even come on anymore. Its a MK1 touchscreen.
     
    Last edited by a moderator: Aug 25, 2010
    rogencam, Aug 25, 2010
    #1
  2. rogencam

    Newman

    Joined:
    Aug 3, 2004
    Messages:
    2,203
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    It sounds like a hardware error. I suggest you contact Clipsal Technical Support.
     
    Newman, Aug 25, 2010
    #2
  3. rogencam

    rogencam

    Joined:
    Jul 11, 2010
    Messages:
    3
    Likes Received:
    0
    Location:
    Brisbane
    Thanks - I did that - sounds like a problem with flash card so they are replacing.
     
    rogencam, Aug 26, 2010
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 12 Channel DIN Relay wont talk!!

  2. PICED wont work for me :(

  3. Could C bus come up with this

  4. C-Bus B&W Touch Screen as 3rd party screen

  5. Touch Screen error on blue Screen - Not loading the OS & C-Gate

  6. hot days lights all come on?

  7. 5753L PIR indicator LED wont come on

  8. 5753L Senors only to come on at night

Loading...