Touch Screen

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by aileen, Jun 3, 2009.

  1. aileen

    aileen

    Joined:
    May 17, 2009
    Messages:
    22
    Likes Received:
    0
    hello,
    I have got a probem with a touch screen.In one of my project villa,which consists of 4 floors,there are touch screens in the first,second and fourth.
    Each of the floors are in four different networks.I have transfered the project to the first and second floors.
    My problem is when I transfered the project to the touch screen in the fourth floor,they say "SOME NETWORK PROPERTIES ARE INVALID"
    And my other problem is about the shutters.the shutters are not working properly from the touch screens.One time it works,the next minute it wont respond.

    Please, take time to respond to my problems and kindly reply me as soon as possible.

    Aileen ([email protected])
     
    aileen, Jun 3, 2009
    #1
  2. aileen

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    This is usually because the messages are unable to get from your touch screen to those networks.

    If you click on the "Show" button of this error message, it will give you details.

    See "C-Bus Network Manager" help file topic

    See C:\Clipsal\PICED\Manuals\C-Bus Networks.pdf for details of how C-Bus Networks operate.

    Use the C-Bus Diagnostic Utility to look at the C-Bus messages to confirm that the messages are being sent from the touch screen.
     
    Darren, Jun 3, 2009
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.