Trigger 2 SENCEs by one key?!

Discussion in 'General Discussion' started by BigBoyVn, Mar 13, 2009.

  1. BigBoyVn

    BigBoyVn

    Joined:
    Aug 3, 2008
    Messages:
    42
    Likes Received:
    0
    Hi everybody!

    As far as I understand, I can trigger 2 sences by 1 "Group address" or 1 key input if there is a touch screen on the network. Please see attached picture.

    I work on a project with a hotel room, and key card is a requirement. When plug key card in it will trigger the "WELLCOME" sence, and trigger "GOODBYE" sence when pluged out.
    I intend to use a bus coupler and a Clipsal keycard switch to trigger sences.

    Can I do this without a touchscreen or a Pascal Controller?!

    Is the Level of lighting group or Action selector of Trigger group can use in this situation? And how to configure?! :confused:

    I found that "Set action selector" is disable and don't know why :confused:(please see the attached pic)?

    Thank you in advance for your support!!! :)
     

    Attached Files:

    BigBoyVn, Mar 13, 2009
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Neo, Support of one application PLUS Trigger Control

  2. How do I trigger a scene in a wireless Wall plug from wired key button?

  3. Can a Neo 8 gang-key input unit trigger scene stored on a SENPILL?

  4. Remote trigger scenes on key inputs

  5. sences through sensors

  6. Dimming two circuits from one key?

  7. two groups, one with timer, controlled by one button

  8. Status and Action on one key

Loading...