Two keypads same program

Hi

We are doing a project in that project there are three 8 button neo keypads,1 pascal controller and one (Bus coupler).

The solution has 3 rooms like hall 1,hall 2,hall 3 these three halls are separated by the movable partition. My client wants when three partitions are closed the 3 neo keypads should work individually to that room only.

But if he opens any one partition say the partition b/w hall 1 and hall 2 is opened then the keypads in the both rooms should work same that means the program on the keypads should change.

i don't have any idea with the coupler and pascal controller can i do that.

 

Hello,

You will need to hook a reed switch on the partition doors to the bus coupler, so thus you will have 2 inputs into the system telling cbus when the doors are open/closed...

You will then need to create virtual cbus groups for the switches and write logic to monitor the state of the doors and do what you need to do..

Have you done much cbus work before?

Cheers.