Unit Starting Address

Discussion in 'C-Bus Toolkit and C-Gate Software' started by Dave Byron, Jun 23, 2009.

  1. Dave Byron

    Dave Byron

    Joined:
    Aug 3, 2004
    Messages:
    835
    Likes Received:
    0
    Location:
    Casurina
    Working on a weekender that has 66 DLTs and I want to start adding then from address 100.
    Toolkit wants to start adding them from address 1 which means all 66 units have to be re addressed.

    What I need is a starting address option.




    dave
     

    Attached Files:

    Dave Byron, Jun 23, 2009
    #1
  2. Dave Byron

    daniel C-Busser Moderator

    Joined:
    Jul 26, 2004
    Messages:
    770
    Likes Received:
    21
    Location:
    Adelaide
    Hi Dave,

    I put it to the dev team and they said you are not inventive enough. Try this:

    Add 99 KEY1 units, then 66 DLTs, then bulk-delete the 99 KEY1 units :)

    Took about 30 seconds here. In all seriousness - it's a good idea though, and it's on the to-do list (#17127).
     
    Last edited by a moderator: Jun 24, 2009
    daniel, Jun 24, 2009
    #2
  3. Dave Byron

    Dave Byron

    Joined:
    Aug 3, 2004
    Messages:
    835
    Likes Received:
    0
    Location:
    Casurina
    Hi Daniel

    I got inventive, add them all then hacked the sourece file to change the unit numbers

    all done now
    next write my own routine to do

    tks


    dave
     
    Dave Byron, Jun 24, 2009
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Starting Cgate2 automatically (Toolkit)

  2. toolkit not starting

  3. cgate not starting with toolkit

  4. Key Input Unit - Area address

  5. Cbus Clock and unit address duplicated

  6. Unit Address using Serial Interface

  7. unit address question

  8. Output Unit Group Address

Loading...