updating touch screen

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by 01spod, Oct 17, 2014.

  1. 01spod

    01spod

    Joined:
    Oct 17, 2014
    Messages:
    2
    Likes Received:
    0
    Location:
    Sydney
    Have just purchased the C touch colour touch screen 5080CTL2 as early model B&W 5000CT touch screen died - clarifying that the same software is used to program the new and old touch screens - Can the program from the old touch screen be uploaded into the new - any short cuts or is it start again, thanks
     
    01spod, Oct 17, 2014
    #1
  2. 01spod

    Conformist

    Joined:
    Aug 4, 2004
    Messages:
    787
    Likes Received:
    74
    Location:
    Adelaide, South Australia
    yes, same programming software (PICED) available from www.clipsal.com/cis as a free download. If you have the project files from your old touchscreen, you can open in PICED and save as your new touchscreen.
     
    Conformist, Oct 17, 2014
    #2
  3. 01spod

    01spod

    Joined:
    Oct 17, 2014
    Messages:
    2
    Likes Received:
    0
    Location:
    Sydney
    Thankyou for the reply and clarification
     
    01spod, Oct 17, 2014
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Updating the Network View

  2. Updating the Network View

  3. DLT TAGS not updating

  4. C-Bus B&W Touch Screen as 3rd party screen

  5. Long Touch - B&W Touch Screen Mk II

  6. Touch Screen error on blue Screen - Not loading the OS & C-Gate

  7. Touch failure in MarkII touch screen

  8. Old BW C-Touch firmware not updating

Loading...