USB on PAC

Discussion in 'C-Bus Wired Hardware' started by johnny, Feb 23, 2007.

  1. johnny

    johnny

    Joined:
    Jan 26, 2007
    Messages:
    18
    Likes Received:
    0
    Location:
    'The Smart State'
    Excuse the ignorance what is the Usb port on the pac for? can you use the pac as a PC interface with the toolkit as well as PICED?

    'J
     
    johnny, Feb 23, 2007
    #1
  2. johnny

    Richo

    Joined:
    Jul 26, 2004
    Messages:
    1,257
    Likes Received:
    0
    Location:
    Adelaide
    Yes, the PAC can be used as a USB PCI with Toolkit. However, it can;t act as a PAC whilst it is acting as a PCI. Th eprimary reason for the USB port is so that PICED can program the PAC.
     
    Richo, Feb 23, 2007
    #2
  3. johnny

    johnny

    Joined:
    Jan 26, 2007
    Messages:
    18
    Likes Received:
    0
    Location:
    'The Smart State'
    do you mean it will be a PC interface while you are using the toolkit then revert back to running the logic when you finish with toolkit? or does it just stay in that mode?
     
    johnny, Feb 23, 2007
    #3
  4. johnny

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,397
    Likes Received:
    26
    Location:
    Adelaide, South Australia
    It will revert to being a PAC when you finish with Toolkit and unplug the USB connection.
     
    ashleigh, Feb 23, 2007
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. USB Adaptors

  2. Usb - Rs232

  3. USB Ports on PCI

  4. 5500PACA USB drivers

  5. USB adaptor

  6. PAC not recognised by USB

  7. 1 Usb for Pac/Piced/Toolkit connection ?

Loading...