Use Touch screen to control sensor and relay on two different network?

Discussion in 'General Discussion' started by donutsku, Jul 12, 2006.

  1. donutsku

    donutsku

    Joined:
    Jul 12, 2006
    Messages:
    1
    Likes Received:
    0
    Hi All,

    i want to ask
    a.)how can i use touch screen to control sensor and relay that loacted on local(254) and sub network(253), i'm using application 56 on local and 57 on subnetwork ??

    b.)how to configure the network bridge to pass the message in next network?

    c.)beside local and sub network, can i control the sensor and relay on different network whick is divided using CNI??

    d.) can i use scene controller instead of touch screen to control different network?


    many thx
     
    donutsku, Jul 12, 2006
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Different sounds for different alarms

  2. Can you program the PIR to operate different lighting at different times of the day

  3. shutter relay control through touch screen

  4. Different Light Levels at different times of the day

  5. Using a two channel relay for single channel ?

  6. PIR Sensor - different lighting levels in its timed cycle

  7. LED Pendant and DALI...do I need to use a relay?

Loading...