Using Area Addressing

Discussion in 'C-Bus Toolkit and C-Gate Software' started by Gazbo, Sep 9, 2009.

  1. Gazbo

    Gazbo

    Joined:
    Sep 9, 2009
    Messages:
    1
    Likes Received:
    0
    Location:
    Canberra
    I'm looking for some help on setting up area addressing to act as master On/Off.
    I have created 4 Zones controlling relays only. It is my understanding that all channels on the relay with the appropriate area address can be controlled by a key input with the same area address, therefore zoned light groups need to be allocated to the appropriate relays. I'm using a 4 gang key switch to control the 4 zones.

    Can anyone step me through the process to achieving individual zone master On/Off control.

    Regards
     
    Gazbo, Sep 9, 2009
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Area group control

  2. Toolkit Unit Addressing

  3. Installer in P'boro area

  4. Help with area and groups

  5. Key Input Unit - Area address

  6. Minder C Bus Address, re-addressing

  7. Light level sensor, group addressing

  8. B&W MKII re addressing itself???

Loading...