Using Paradox on the Security Application

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by Jannie, Dec 10, 2008.

  1. Jannie

    Jannie

    Joined:
    Aug 4, 2004
    Messages:
    69
    Likes Received:
    0
    Location:
    Cape Town, South Africa
    With the Paradox PRT3 module, the Paradox system is supposed to support the Security Application in HomeGate.

    Setting it up as best as we can figure out (not that many things to set), we get the feedback from the alarm system coming into HomeGate, so one can see security zones open and close, for example.

    However, any 'keypad' function that must go the other way (i.e. from HomeGate to Paradox) does not seem to work.

    QuickArm from HomeGate to Paradox works, but any function that is under the keypad grouping seems to not work at all.

    Anyone have any idea or advice on this?
     
    Jannie, Dec 10, 2008
    #1
  2. Jannie

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    The Paradox security system does not yet implement all aspects of the C-Bus Security Application. You will need to contact them for details of when they plan to complete the C-Bus interface.
     
    Darren, Dec 10, 2008
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Security Application D0

  2. Q: C-Bus security Application, status report 1?

  3. New V4 telephony & security application

  4. Security Application

  5. Security Application Controlling two alarms

  6. Security Application reports only 80 zones.

  7. M1 <-> C-Bus via Security Application

  8. C-Gate and Security Application

Loading...