Version 1 Colour Touch screen PSU stub cable

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by pgardiner, Dec 30, 2014.

  1. pgardiner

    pgardiner

    Joined:
    Dec 21, 2004
    Messages:
    51
    Likes Received:
    1
    Gents,

    I need the cable that goes from the V1 Colour Touch Screen Power Supply to the Touch Screen, it is a 4 pin as in the picture at the TS end.

    The part itself or a source for the component part will do. Part lost by builder and no hope to find it. New PSU does not come with TS end cable.

    It would also be useful to have the component for the end of the PSU cable as well, at least I can make up the whole thing. ie Touch screen to PSU.

    Happy New Year to you all.
     

    Attached Files:

    pgardiner, Dec 30, 2014
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Colour C touch and larger version

  2. Homegate old version running on Colour C Touch

  3. Difference between the pink cable and an usual RJ45 cable

  4. OEM Alternative PSU

  5. Version 1 vs version 2 cbus

  6. CTouch Version 2 PS with CTouch Version 3 touch screen

  7. Calculating maximum cable runs, cable topologies, etc

  8. Is any cable other than 'Pink' C-Bus cable certified?

Loading...