Wall wedge for BW touch screen

Discussion in 'C-Touch/HomeGate/SchedulePlus/PICED Software' started by tobex, Oct 26, 2010.

  1. tobex

    tobex

    Joined:
    Nov 3, 2006
    Messages:
    728
    Likes Received:
    0
    Location:
    Sydney, Australia
    Is there anyone in the market who makes a wedge, angled spacer or other kind of mounting platform which allows the touch screen to operate at an angle other than parallel to its mounting angle.

    I was hoping to "rest" the touch panel on a surface which increases visibility to someone standing up.

    Even a modest 20 degrees (thicker at bottom) has benefits.
     
    tobex, Oct 26, 2010
    #1
  2. tobex

    Darren Senior Member

    Joined:
    Jul 29, 2004
    Messages:
    2,361
    Likes Received:
    0
    Location:
    Adelaide, South Australia
    Generally touch screens get mounted much higher than a regular wall switch to make them easier to read and use.

    I have seen a home-made angled mount once, but am not aware of anyone making these for sale.
     
    Darren, Oct 26, 2010
    #2
  3. tobex

    tobex

    Joined:
    Nov 3, 2006
    Messages:
    728
    Likes Received:
    0
    Location:
    Sydney, Australia
    Thanks for letting me know. Off to Solidworks ! Time for some CAD.
     
    tobex, Oct 27, 2010
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. HTML for Colour Touch Screen

  2. Touch Screen to display Load blown or not for a DALI Ballast through a C-BusDali Gwy

  3. What height for touch screen

  4. C-Bus B&W Touch Screen as 3rd party screen

  5. Long Touch - B&W Touch Screen Mk II

  6. Touch Screen error on blue Screen - Not loading the OS & C-Gate

  7. Wall box for Saturn 5082NL,GF and 5085DL-LF switchs

  8. How to create gentle on/off ramp in PICED for touch screen

Loading...