Wireless problems

Discussion in 'C-Bus Wireless Hardware' started by JasonCox, May 22, 2006.

  1. JasonCox

    JasonCox

    Joined:
    Aug 17, 2004
    Messages:
    75
    Likes Received:
    0
    I did a wireless commision the other day and I noticed some problems...

    I used the LED 'ALWAYS ON' indicator and it doesn't work. I used it on two different switches and still the same result. The button was setting a goodbye scene on a long press. something I missed?

    The other problem was trying to get 'SCENE TOGGLE' to appear on some switches and not on others. On one switch it was available and another, it was not. Both the same type of switch.
     
    JasonCox, May 22, 2006
    #1
  2. JasonCox

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,398
    Likes Received:
    26
    Location:
    Adelaide, South Australia
    Scene toggle: Different firmware versions. Scene toggle would not have been supported in the unit where you could not select it.

    From memory, scene toggle first appeared in about firmware ver 1.7 (though I'm not dea sure of that).

    In general you should not need to set an indicator to Always On. Scene indicators now actually work properly so while the scene is active the indicator is on, and if the scene is changed the indicator goes off.

    I'm not aware of any issues with "Always On".

    If you can email me the project (I'll PM you my email address) then i'll take a quick look, and if there is a defect I'll raise it in the tracking system.
     
    ashleigh, May 22, 2006
    #2
  3. JasonCox

    JasonCox

    Joined:
    Aug 17, 2004
    Messages:
    75
    Likes Received:
    0
    I use 'ALWAYS ON' to indicate to the user which button to use for the goodbye scenes...
     
    JasonCox, May 22, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Possible Wide Screen Display Problems

  2. Toolkit problems

  3. DLT Programming Problems

  4. Problems with Touchscreen:

  5. Neo Scene problems

  6. Wireless gateway problems

  7. Problems with UK wireless plugs and gateway

Loading...