Wiser 2 Socket 80

Discussion in 'C-Bus Wiser 2 Controller' started by Format, May 12, 2016.

  1. Format

    Format

    Joined:
    Jan 24, 2015
    Messages:
    9
    Likes Received:
    0
    Location:
    Adelaide, SA
    Is there a way to have the Wiser 2 release port 80 so that I can setup the ServerSocket to listen for an incoming connection on that port? I'm using a different remote port number and also SSL so I don't have any (known) need for a non-SSL connection to that port otherwise.
     
    Format, May 12, 2016
    #1
  2. Format

    qun

    Joined:
    Sep 27, 2004
    Messages:
    16
    Likes Received:
    0
    Do you mean changing Wiser 2 port number from 80 to a different number? You can change it on Wiser project ---- Project Details Wizard --- Wiser --- Access -- Remote Access Port
     

    Attached Files:

    qun, May 25, 2016
    #2
  3. Format

    Format

    Joined:
    Jan 24, 2015
    Messages:
    9
    Likes Received:
    0
    Location:
    Adelaide, SA
    That 'remote port' appears only to affect Remote Access, not same subnet access. Port 80 is still being taken over by the Wiser's software and the web interface is still up on Port 80

    Funnily enough when running in PICED SImulation Mode Port 80 is available to the Wiser logic being simulated to bind the Server Socket to.
     
    Format, May 31, 2016
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Handling socket death

  2. Colour Touch Screen socket Error # 10053

  3. L5512RVF for electrical socket isolation?

  4. PICED Socket connections

  5. Vista Socket Error Message

  6. Correct unit for on/off of 13amp socket

  7. Wiser error "socket exception"

  8. Wiser Socket Reciving issue

Loading...