Wiser added to existing C-bus

Discussion in 'C-Bus Wiser 1 Controller' started by ebbeckt, Nov 30, 2010.

  1. ebbeckt

    ebbeckt

    Joined:
    Nov 5, 2010
    Messages:
    4
    Likes Received:
    0
    Location:
    Sydney
    Hi
    I've just added a WISER unit to an existing c-bus system installed by someone else. The existing system has a 5000CT B/W panel with some schedules and scenes coded in to it. I've added new scenes and schedule to my wiser project created with the lastest version of PICED. My schedules don't seem to work consistently and I cant seem to overwrite the C-touch.
    I would appreciate any counsel here.
    Thanks
    Tim
    :(
     
    ebbeckt, Nov 30, 2010
    #1
  2. ebbeckt

    tobex

    Joined:
    Nov 3, 2006
    Messages:
    728
    Likes Received:
    0
    Location:
    Sydney, Australia
    There is a "hidden" menu which allows you to set the ID number of the C-Touch. If you look very closely at PICED you will see that often the C-Touch default is unit 0 for C-Touch but you would want to change that to what the value is on your network. Then read the project-edit-upload.

    However, you may need to perform a firmware update also.
     
    tobex, Nov 30, 2010
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. New Training for existing users

  2. Replacing existing units

  3. retrieving existing project

  4. clearing out all programming from existing hardware

  5. Updating an existing Colour Touchscreen

  6. Setting up Wiser on Existing Network

  7. Will C-Bus work with existing Fig8 cabling?

  8. Tracing Existing C-Bus Wring

Loading...