Wiser and 5400/16CB

Discussion in 'C-Bus Wiser 1 Controller' started by Roosta, Aug 3, 2012.

  1. Roosta

    Roosta

    Joined:
    Nov 22, 2011
    Messages:
    560
    Likes Received:
    1
    Location:
    Australia
    Hey Guys,

    I am struggling to get the wiser to arm, disarm and show status for a 5400/16CB alarm panel..

    From what i can see its pretty simple in theory.. Toolkit no options in the interface really.. Piced, widget manager no options exept the generic widgetty stuff.. But no go..

    Alarm arms and disarms fine via normal dtmf dialler..

    I have enabled cbus control in the 5400/16CB via P150E 1E..

    CBUS Comms is working brilliantly from wiser to other devices..

    Any one have any thoughts, ideas or hints before i tear all my hair out..

    Cheers..
     
    Roosta, Aug 3, 2012
    #1
  2. Roosta

    Roosta

    Joined:
    Nov 22, 2011
    Messages:
    560
    Likes Received:
    1
    Location:
    Australia
    Problem solved guys..

    Apparently I should read the destructions more thoroughly..

    Didn't connect the RED serial wire.. Ha Ha..

    All good now..

    Cheers..
     
    Roosta, Aug 3, 2012
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Homesafe 5400

  2. Clipsal Homesafe 5400

  3. homesafe 5400 monitor beeps

  4. Difference between HomeSafe 5400 and 5400/CB16?

  5. Homesafe 5400/16CB Tamper

  6. C-Bus and 5400 Enabled Alarm

Loading...