Wiser and Monitors

That sounds like a good solution.

The other thing you could try is to add a delay of 30 seconds or so to the module. The temperature will not be changing very fast, so this delay will make no real difference to the operation.

 

One more thing...

I had a hell of a time getting the logic to compile after following Nemans most excellent instructions. I changed the network name to my network name with no success. I changed it to the network number (254 without the "quotes") and it worked. One other thing I found was that the device had to be added in the Measurement Application Manager as well (obvious now!).

Go Project > C-Bus Applications > Measurement Manager...

Add the device and go back and re-compile. That fixed all the errors for me.

And don't forget to Run the logic before uploading again...

Thought this might save someone else some headaches.

 

or you could use the HasChanged function in the code?