Wiser CNI dead??

Hi

After working perfectly for some time, my Wiser has suddenly stopped being able to communicated with the C-Bus network.

I can get the Wiser UI but it indicates no C-Bus connection.

However, the C-Bus and LAN LEDs on the device continue to flash green/orange as they have always done.

The Wiser tab of the router interface gives:

Firmware Version Kona_1.24.0
Project Size 351242 / 524272 : 66 percent full
Project Information <deleted>
CNI Information 192.168.0.101:10001
User Interface Version CBC - 3.7.0,UI - 3.23

However, the CNI does not respond to a ping at the 192.168.0.101 address.

I have powered off and on - no difference.

I have re-uploaded my project using PICED - no difference.

My guess is a hardware fault in the CNI. But I'd be grateful for any insights.

Cheers.

 

Thanks Colin. I had tried that and it didn't turn up.

However, for a reason I can't fathom, it seems to have started working again yesterday, entirely of its own volition.

I'll monitor and post back if the problem arises again.