Wiser CNI

Discussion in 'C-Bus Wiser 1 Controller' started by Winda, May 10, 2012.

  1. Winda

    Winda

    Joined:
    May 10, 2012
    Messages:
    1
    Likes Received:
    0
    Location:
    China
    When I use the wiser,I can inter the Wiser Page(192.168.2.1).When I click the picture,the button in the page can show the lamp on and off, but it cannot control the C-BUS,What should I do? And I find the CIN number is wrong. How can I change the number?:confused:
     
    Winda, May 10, 2012
    #1
  2. Winda

    kjayakumar

    Joined:
    Oct 27, 2008
    Messages:
    448
    Likes Received:
    0
    It is hard to understand what exactly you mean. Some screenshots of what you're seeing would help. Here's what I would do:
    a) if your CNI IP address configured in your Wiser project is incorrect
    - open your Wiser project in PICED
    - go to Project Details and configure the CNI IP entry
    - transfer project to Wiser

    b) if your Wiser project is correct and you want to change your CNI IP
    - use the C-Bus IP Setup utility to change the CNI's IP address
     
    kjayakumar, May 11, 2012
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Setting Wiser CNI IP Address

  2. Wiser CNI Not Operating

  3. Wiser Iphone app to control CNI

  4. trying to readdress wiser CNI with ip utility

  5. Wiser - Use without inbuilt CNI

  6. Looking for used CNI or Wiser

  7. CNI 5500 module vs Wiser CNI

  8. CNI to CNI Communications

Loading...