Wiser external IP access problem

Discussion in 'C-Bus Wiser 1 Controller' started by nickrusanov, Apr 30, 2013.

  1. nickrusanov

    nickrusanov

    Joined:
    Aug 5, 2004
    Messages:
    308
    Likes Received:
    0
    Location:
    russia
    Client wants to control Wiser from outside. External connection from browser is ok, asking login/password.

    But than an error. Unable to connect to Wiser. LAN connection is OK. Enable ToolKit Control and Enable Projector Control ticked. Wiser internal IP is 192.168.0.2, it is not routing, AP mode

    http://*/SetupDHCP.htm seems to be ok.

    Any suggestions? Thank you!
     
    Last edited by a moderator: May 29, 2013
    nickrusanov, Apr 30, 2013
    #1
  2. nickrusanov

    kjayakumar

    Joined:
    Oct 27, 2008
    Messages:
    448
    Likes Received:
    0
    The unable to connect message from WAN side but able to connect on LAN side suggests to me that port 8888 is not accessible. You mentioned the Wiser is not routing, which suggests there is an upstream router on your WAN, have you forwarded those ports (8888, 8836, etc) on the upstream router to the Wiser, and have you set your PICED project to be in LAN mode with its gateway set to your router?
     
    kjayakumar, May 1, 2013
    #2
  3. nickrusanov

    nickrusanov

    Joined:
    Aug 5, 2004
    Messages:
    308
    Likes Received:
    0
    Location:
    russia
    Thank you! It worked
     
    nickrusanov, May 29, 2013
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. CNI and external power???

  2. External PIR & steam

  3. Cbus external loggin

  4. External Light Level Sensors

  5. Thermostat - remote external sensor

  6. WAREMA External Venetian Blinds?

  7. External Temperature Sensing via C-Bus

  8. Wireless only network and external control

Loading...