Wiser Subnet Mask

Discussion in 'C-Bus Wiser 1 Controller' started by ChrisDeighton, Mar 10, 2010.

  1. ChrisDeighton

    ChrisDeighton

    Joined:
    Feb 23, 2008
    Messages:
    8
    Likes Received:
    0
    Hi,

    It appears that the Wiser web interface only allows the LAN subnet mask to be set to one of the values listed in the drop-down list. I need to set the subnet mask to 255.255.0.0, which isn't listed as an option.

    Is there another way to configure the subnet mask to this value?

    Thanks,

    Chris.
     
    ChrisDeighton, Mar 10, 2010
    #1
  2. ChrisDeighton

    kjayakumar

    Joined:
    Oct 27, 2008
    Messages:
    448
    Likes Received:
    0
    I need to doublecheck but I think there is no current way for you to be able to use a class B subnet with Wiser.
     
    kjayakumar, Mar 10, 2010
    #2
  3. ChrisDeighton

    Colin Moderator

    Joined:
    Aug 3, 2004
    Messages:
    125
    Likes Received:
    24
    Location:
    Australia
    Correct Wiser Does not Support Subnet's larger than 255.255.255.0

    Does the network that wiser is placed on really require such a large subnet.
     
    Colin, Mar 14, 2010
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Clipsal Premise Gateway & Wiser

  2. Setting Wiser CNI IP Address

  3. Wiser vs PAC / Wiser Questions

  4. Feedback from Wiser-Cbus-Wiser

  5. Problems with Subnet Mask and CNI

  6. Thermostat & Wiser - Zone Control from DLT & wiser schedule

  7. Wiser vs Wiser HD App

  8. WISER - Does Wiser MKII require CN5500CN2

Loading...