WISER without C-bus network Power

Hi All.

I would like to ask for some problem about WISER.

I wish to build up the little home system using WISER as the interface to integrate 3rd party device without any C-bus network and power.

I will build up the logic and the WISER graphic for control. Is it possible to success or I must need to add the C-bus power supply for the system?

My config:
Wiser >> TCPIP >> 3rd party device
*no c-bus power supply

Thank you a lot!

 

Hello damonfung.

You will need as a minimum, C-Bus power, clock and burden.
Use a power supply (5500PS) and set the clock and burden in the Wiser and you should be good to go.

Mark

 

Hello,

You should be aware that currently the wiser logic engine does not support http commands..

This may affect what you are trying to do,.

Cheers..

 

Thank you!

Thats mean C-bus power supply should be the part of system even no C-bus module in this system?