Work with 2 PCI on one server

Discussion in 'C-Bus Toolkit and C-Gate Software' started by nickrusanov, Aug 8, 2007.

  1. nickrusanov

    nickrusanov

    Joined:
    Aug 5, 2004
    Messages:
    308
    Likes Received:
    0
    Location:
    russia
    Hello!
    I have question from integratror. Is it possible to work with 2 networks each connected through PCI to one server? (1 server, 2 networks, 2 PCI's)

    Through cbm.dll or some other way.

    Thank you!
     
    nickrusanov, Aug 8, 2007
    #1
  2. nickrusanov

    znelbok

    Joined:
    Aug 3, 2004
    Messages:
    1,151
    Likes Received:
    17
    what work are you doing.

    If you want to use toolkit then I don't see why not (I have not tried it - CGate may not like it). You will have two separate projects both with a PCI. One will be on one comm port and the other will be on a different comm port.

    If you want to pass commands between them, then I dont know if that can be done but a bridge will do that for you

    Is there any reason for not using a bridge (apart from the cost!!).

    Mick
     
    znelbok, Aug 8, 2007
    #2
  3. nickrusanov

    ashleigh Moderator

    Joined:
    Aug 4, 2004
    Messages:
    2,397
    Likes Received:
    26
    Location:
    Adelaide, South Australia
    cbm.dll is designed for a single pci.
     
    ashleigh, Aug 9, 2007
    #3
  4. nickrusanov

    nickrusanov

    Joined:
    Aug 5, 2004
    Messages:
    308
    Likes Received:
    0
    Location:
    russia
    Thank you. Any advise on 2 PCI's or just answer "no, use bridge?"
     
    nickrusanov, Aug 9, 2007
    #4
  5. nickrusanov

    Duncan

    Joined:
    Jul 23, 2004
    Messages:
    925
    Likes Received:
    0
    Location:
    Salinas de Garci Mendoza, Bolivia
    CGate will happily deal with two PCI's connected to two different networks.
     
    Duncan, Aug 9, 2007
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Telephone Interface will not work with answering machines

  2. Dimmable CFLs - will these work with a DIN Dimmer ?

  3. Wiser app does not work with IOS4

  4. two groups, one with timer, controlled by one button

  5. Configuring the Wiser Power Meter to work with the new CMU

  6. Wiser with Web Server one the network?

  7. Does schedule+ work with Windows 7 or Windows server 2008?

  8. Software to convert OPC AE server to OPC DA server

Loading...