Workaround for slow toolkit

Discussion in 'C-Bus Toolkit and C-Gate Software' started by Dave Byron, Jun 15, 2005.

  1. Dave Byron

    Dave Byron

    Joined:
    Aug 3, 2004
    Messages:
    835
    Likes Received:
    0
    Location:
    Casurina
    I have that when toolkit reachs the stage that it becomes unusable, happens all the time when you work it.

    leave the networks open (scan already done)
    close toolkit and leave cgate going
    reopen toolkit

    you are now back to full speed and the networks are still open and the scan still in place, so often do not have to waste time rescaning.

    repeat as required


    dave
     
    Dave Byron, Jun 15, 2005
    #1
  2. Dave Byron

    Duncan

    Joined:
    Jul 23, 2004
    Messages:
    925
    Likes Received:
    0
    Location:
    Salinas de Garci Mendoza, Bolivia
    Thanks for that tip Dave,

    We're looking into this at the moment.
     
    Duncan, Jun 17, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Wireless Range Limitation workaround

  2. Slow response from Homegate

  3. C-Touch slow reaction speed

  4. C-Touch slow responding

  5. c touch slow with ip camera display

  6. Receiving serial slow to process

  7. Dimmer slow to recover and power failure

  8. Toolkit 1.12.0 and Windows 7 64-bit : Workaround

Loading...